Getting A Boat Up On The Plane

getting a boat up on the plane

First trim the engines in all the way, tell everyone to hold on, then accelerate gradually onto plane. as the boat speeds up and the bow comes down, start trimming the engines out. when the bow is. Some users also report reduced exhaust noise when the boat is on plane. but the big advantage is in the boost at take-off. a well-set-up boat in the runabout or bass boat category should get on top in 4 to 5 seconds, and the foils make that possible in many cases with packages that previously took 8 to 10 seconds to get up, if they ever made it.. Getting you're boat on plane shouldn't need full throttle but a good portion of it to get it on plane. the more throttle that you use, the faster it gets there. (you can pick up a set for around $125 on amazon.com) perhaps start with the least expensive smart tabs, and if still in need of faster plane time, consider a swap of props..

If 3,000 sign up, motorists will be able to order

Replicate an old control-line design in foam? - rc groups

getting a boat up on the plane Sounds like you have the engine trimmed incorrectly, it should be all the way down to get your boat on a plane, then trimmed up to increase speed by lifting th bow about 3/4 trim up on the trim indicator. at full speed you have about 5,800 rpm's at approx 45-50 mph. tom quote;. Planing (/